dmesg - P7Zip Compression
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.3-1.fc17.x86_64 (mockbuild@) (gcc version 4.7.2 20120921 (Red Hat 4.7.2-2) (GCC) ) #1 SMP Mon Oct 22 15:32:35 UTC 2012
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000df68ffff] usable
BIOS-e820: [mem 0x00000000df690000-0x00000000df69dfff] ACPI data
BIOS-e820: [mem 0x00000000df69e000-0x00000000df6cffff] ACPI NVS
BIOS-e820: [mem 0x00000000df6d0000-0x00000000df6ddfff] reserved
BIOS-e820: [mem 0x00000000df6e0000-0x00000000df6fffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011fffffff] usable
NX (Execute Disable) protection: active
DMI present.
DMI: System manufacturer System Product Name/P5KPL-AM EPU, BIOS 0501 08/20/2010
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-DFFFF write-protect
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0E0000000 mask FE0000000 uncachable
1 base 000000000 mask F00000000 write-back
2 base 100000000 mask FE0000000 write-back
3 base 0DF700000 mask FFFF00000 uncachable
4 base 0DF800000 mask FFF800000 uncachable
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3584MB, range: 512MB, type UC
reg 1, base: 0GB, range: 4GB, type WB
reg 2, base: 4GB, range: 512MB, type WB
reg 3, base: 3575MB, range: 1MB, type UC
reg 4, base: 3576MB, range: 8MB, type UC
total RAM covered: 4087M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3575MB, range: 1MB, type UC
reg 2, base: 3576MB, range: 8MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
e820: update [mem 0xdf700000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdf690 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0xdf68ffff]
[mem 0x00000000-0xdf5fffff] page 2M
[mem 0xdf600000-0xdf68ffff] page 4k
kernel direct mapping tables up to 0xdf68ffff @ [mem 0x1f8ff000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x11fffffff]
[mem 0x100000000-0x11fffffff] page 2M
kernel direct mapping tables up to 0x11fffffff @ [mem 0xdf68a000-0xdf68ffff]
RAMDISK: [mem 0x35cde000-0x36e66fff]
ACPI: RSDP 00000000000fb7f0 00014 (v00 ACPIAM)
ACPI: RSDT 00000000df690000 0003C (v01 A_M_I_ OEMRSDT 08001020 MSFT 00000097)
ACPI: FACP 00000000df690200 00084 (v02 A_M_I_ OEMFACP 08001020 MSFT 00000097)
ACPI: DSDT 00000000df6905c0 08A54 (v01 A1350 A1350000 00000000 INTL 20060113)
ACPI: FACS 00000000df69e000 00040
ACPI: APIC 00000000df690390 0006C (v01 A_M_I_ OEMAPIC 08001020 MSFT 00000097)
ACPI: MCFG 00000000df690400 0003C (v01 A_M_I_ OEMMCFG 08001020 MSFT 00000097)
ACPI: OEMB 00000000df69e040 00080 (v01 A_M_I_ AMI_OEM 08001020 MSFT 00000097)
ACPI: HPET 00000000df699020 00038 (v01 A_M_I_ OEMHPET 08001020 MSFT 00000097)
ACPI: GSCI 00000000df69e0c0 02024 (v01 A_M_I_ GMCHSCI 08001020 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011fffffff]
Initmem setup node 0 [mem 0x00000000-0x11fffffff]
NODE_DATA [mem 0x11ffec000-0x11fffffff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b600000-ffff88011f5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009efff]
node 0: [mem 0x00100000-0xdf68ffff]
node 0: [mem 0x100000000-0x11fffffff]
On node 0 totalpages: 1046047
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3913 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 894672 pages, LIFO batch:31
Normal zone: 2048 pages used for memmap
Normal zone: 129024 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
PM: Registered nosave memory: 00000000df690000 - 00000000df69e000
PM: Registered nosave memory: 00000000df69e000 - 00000000df6d0000
PM: Registered nosave memory: 00000000df6d0000 - 00000000df6de000
PM: Registered nosave memory: 00000000df6de000 - 00000000df6e0000
PM: Registered nosave memory: 00000000df6e0000 - 00000000df700000
PM: Registered nosave memory: 00000000df700000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
e820: [mem 0xdf700000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88011fc00000 s84288 r8192 d22208 u524288
pcpu-alloc: s84288 r8192 d22208 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027609
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Memory: 4017992k/4718592k available (6307k kernel code, 534404k absent, 166196k reserved, 6895k data, 1028k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
NR_IRQS:8448 nr_irqs:712 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3243.343 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6486.68 BogoMIPS (lpj=3243343)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
ACPI: Core revision 20120711
ftrace: allocating 23438 entries in 92 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 07
Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (25946.74 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xdf69e000-0xdf6cffff] (204800 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 18:25:58, date: 11/01/12
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000df6a00f0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: SSDT 00000000df6a02d0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: SSDT 00000000df6a0420 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU3PM 00000001 INTL 20060113)
ACPI: SSDT 00000000df6a0570 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00143 (v01 AMI CPU4PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xdf700000-0xffffffff]
pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xfe900000-0xfe9fffff]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xfea78000-0xfea7bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 20: [io 0xd400-0xd41f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 20: [io 0xd480-0xd49f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 20: [io 0xd800-0xd81f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 20: [io 0xd880-0xd89f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 10: [mem 0xfea77c00-0xfea77fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018f
pci 0000:00:1f.1: reg 10: [io 0xc480-0xc487]
pci 0000:00:1f.1: reg 14: [io 0xc400-0xc403]
pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7]
pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb]
pci 0000:00:1f.1: reg 20: [io 0xbc00-0xbc0f]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
pci 0000:01:00.0: [1969:1026] type 00 class 0x020000
pci 0000:01:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
pci 0000:01:00.0: reg 18: [io 0xec00-0xec7f]
pci 0000:01:00.0: PME# supported from D3hot D3cold
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: PCI bridge to [bus 01]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-ff]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xdf700000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdf690000-0xdfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000d0000-0x000dffff window]
pnp 00:00: [mem 0xdf700000-0xffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed14000-0xfed19fff]
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [dma 4]
pnp 00:02: [io 0x0000-0x000f]
pnp 00:02: [io 0x0081-0x0083]
pnp 00:02: [io 0x0087]
pnp 00:02: [io 0x0089-0x008b]
pnp 00:02: [io 0x008f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x0070-0x0071]
pnp 00:03: [irq 8]
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: [io 0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [io 0x00f0-0x00ff]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [irq 7]
pnp 00:06: [dma 3]
pnp 00:06: [io 0x0378-0x037f]
pnp 00:06: [io 0x0778-0x077f]
pnp 00:06: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:07: [io 0x0290-0x0297]
system 00:07: [io 0x0290-0x0297] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0022-0x003f]
pnp 00:08: [io 0x0044-0x005f]
pnp 00:08: [io 0x0062-0x0063]
pnp 00:08: [io 0x0065-0x006f]
pnp 00:08: [io 0x0072-0x007f]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x00a2-0x00bf]
pnp 00:08: [io 0x00e0-0x00ef]
pnp 00:08: [io 0x04d0-0x04d1]
pnp 00:08: [io 0x0800-0x087f]
pnp 00:08: [io 0x0400-0x03ff disabled]
pnp 00:08: [io 0x0480-0x04bf]
pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
pnp 00:08: [mem 0xfed20000-0xfed8ffff]
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [mem 0xfed00000-0xfed003ff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:0a: [mem 0xffb00000-0xffbfffff]
pnp 00:0a: [mem 0xfff00000-0xffffffff]
pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:0b: [mem 0xffc00000-0xffefffff]
system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [mem 0xfec00000-0xfec00fff]
pnp 00:0c: [mem 0xfee00000-0xfee00fff]
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [irq 4]
pnp 00:0d: [dma 0 disabled]
pnp 00:0d: [io 0x03f8-0x03ff]
pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0e: [mem 0xf0000000-0xf3ffffff]
system 00:0e: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0f: [mem 0x00000000-0x0009ffff]
pnp 00:0f: [mem 0x000c0000-0x000cffff]
pnp 00:0f: [mem 0x000e0000-0x000fffff]
pnp 00:0f: [mem 0x00100000-0xdf6fffff]
pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0xdf6fffff] could not be reserved
system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf700000-0xdf8fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf900000-0xdfafffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xdfb00000-0xdfcfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0xdf700000-0xdf8fffff]
pci 0000:00:1c.0: bridge window [mem 0xdf900000-0xdfafffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 01]
pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.1: bridge window [mem 0xdfb00000-0xdfcfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdf700000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0xdf700000-0xdf8fffff]
pci_bus 0000:02: resource 2 [mem 0xdf900000-0xdfafffff 64bit pref]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:01: resource 2 [mem 0xdfb00000-0xdfcfffff 64bit pref]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xdf700000-0xffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 17956k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xdb68a000-0xdf689fff] (64MB) mapped at [ffff8800db68a000-ffff8800df689fff]
audit: initializing netlink socket (disabled)
type=2000 audit(1351794358.368:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7882
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005000000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Requesting acpi_cpufreq
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel G33 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 18
ata2: PATA max UDMA/100 cmd 0x8f0 ctl 0x8f8 bmdma 0xbc08 irq 18
ata_piix 0000:00:1f.2: MAP [
P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
ata2: port disabled--ignoring
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 23
ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 23
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.3-1.fc17.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.6.3-1.fc17.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 4:389:442
rtc_cmos 00:03: setting system clock to 2012-11-01 18:25:59 UTC (1351794359)
ata3.00: ATA-7: SAMSUNG HD322HJ, 1AC01118, max UDMA7
ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.01: ATAPI: TSSTcorp CDDVDW SH-S223L, SB03, max UDMA/100
ata3.00: configured for UDMA/133
ata3.01: configured for UDMA/100
scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD322HJ 1AC0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ACPI: Invalid Power Resource to register!
scsi 2:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223L SB03 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sd 2:0:0:0: [sda] Attached SCSI disk
sr 2:0:1:0: Attached scsi CD-ROM sr0
sr 2:0:1:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 1028k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1872k freed
Freeing unused kernel memory: 1420k freed
dracut: dracut-018-105.git20120927.fc17
dracut: rd.luks=0: removing cryptoluks activation
dracut: rd.lvm=0: removing LVM activation
udevd[122]: starting version 182
[drm] Initialized drm 1.1.0 20060810
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
ACPI: Invalid Power Resource to register!
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 1-2: new high-speed USB device number 3 using ehci_hcd
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
usb 1-2: New USB device found, idVendor=413c, idProduct=1010
usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-2: Product: USB 2.0 Hub [MTT]
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
Console: switching to colour frame buffer device 180x56
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
i915: No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
dracut: rd.dm=0: removing DM RAID activation
dracut: rd.md=0: removing MD RAID activation
usb 2-1: new low-speed USB device number 2 using uhci_hcd
usb 2-1: New USB device found, idVendor=045e, idProduct=00d1
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Microsoft Optical Mouse with Tilt Wheel
usb 2-1: Manufacturer: Microsoft
input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
hid-generic 0003:045E:00D1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:1d.0-1/input0
tsc: Refined TSC clocksource calibration: 3243.599 MHz
Switching to clocksource tsc
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-2.4: new low-speed USB device number 4 using ehci_hcd
dracut: _Fedora-17-x86_6: clean, 220061/1310720 files, 2327408/5242880 blocks
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
dracut: Mounted root filesystem /dev/sda1
usb 1-2.4: New USB device found, idVendor=413c, idProduct=2110
usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.4: Product: Dell Wired Multimedia Keyboard
usb 1-2.4: Manufacturer: Dell
input: Dell Dell Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.0/input/input3
hid-generic 0003:413C:2110.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:1d.7-2.4/input0
input: Dell Dell Wired Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2.4/1-2.4:1.1/input/input4
hid-generic 0003:413C:2110.0003: input,hiddev0,hidraw2: USB HID v1.10 Mouse [Dell Dell Wired Multimedia Keyboard] on usb-0000:00:1d.7-2.4/input1
dracut: Switching root
type=1404 audit(1351794361.196:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 103173 rules.
SELinux: 2048 avtab hash slots, 103173 rules.
SELinux: 9 users, 15 roles, 4212 types, 229 bools, 1 sens, 1024 cats
SELinux: 83 classes, 103173 rules
SELinux: Permission wake_alarm in class capability2 not defined in policy.
SELinux: Permission block_suspend in class capability2 not defined in policy.
SELinux: the above unknown classes and permissions will be allowed
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev sda1, type ext4), uses xattr
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
type=1403 audit(1351794361.393:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 233ms 237us.
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: Relabelled /dev and /run in 37ms 273us.
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
systemd[1]: systemd 44 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP; fedora)
systemd[1]: Set hostname to .
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
systemd-journald[306]: Fixed max_use=197.2M max_size=24.6M min_size=64.0K keep_free=98.6M
systemd-journald[306]: Vacuuming...
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
EXT4-fs (sda1): re-mounted. Opts: (null)
udevd[311]: starting version 182
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
microcode: CPU0 updated to revision 0x70a, date = 2010-09-29
microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
microcode: CPU1 updated to revision 0x70a, date = 2010-09-29
microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
microcode: CPU2 updated to revision 0x70a, date = 2010-09-29
microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
microcode: CPU3 updated to revision 0x70a, date = 2010-09-29
microcode: Microcode Update Driver: v2.00 , Peter Oruba
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
ACPI Warning: 0x0000000000000400-0x000000000000041f SystemIO conflicts with Region \SMRG 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:326 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:330 hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:334 dig-out=0x20/0x0
ALSA sound/pci/hda/hda_auto_parser.c:335 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:339 Rear Mic=0x1a
ALSA sound/pci/hda/hda_auto_parser.c:339 Front Mic=0x1e
ALSA sound/pci/hda/hda_auto_parser.c:339 Line=0x1b
ALSA sound/pci/hda/hda_auto_parser.c:339 CD=0x1f
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
intel_rng: FWH not detected
ppdev: user-space parallel port driver
ACPI Warning: 0x0000000000000480-0x00000000000004bf SystemIO conflicts with Region \GPS0 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
iTCO_vendor_support: vendor-support=0
Adding 5242876k swap on /dev/sda2. Priority:0 extents:1 across:5242876k
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda3, type ext4), uses xattr
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x3eb offMax=0x1637
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.4 (interface 0x001a0004).
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
vboxpci: IOMMU not found (not registered)
ATL1E 0000:01:00.0: irq 44 for MSI/MSI-X
ATL1E 0000:01:00.0: em1: NIC Link is Up
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
fuse init (API version 7.20)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts